Archive for November, 2009
Backup & Recovery Specialist Exam for Storage:E20-597試験
E20-597試験の経験を分かち合うに通じて、E20-597を受けるつもりの人達にある程度助けようを願います。
試験問題集はそんなに難しくない、必要なのはいろんな種類の知識を分かるべきで、わっかたら気楽に試験を通います。資料を選択するのは試験にとって非常に重要なので、もし貴方が育成訓練を参加したら、そんな難しい問題ではないと思って、もし独学ったら、重要になにます。EMC pressの政府資料は必要であって、あなたは広範に収集しなければなりません、EMC試験を分かってそれとも挺広のに関連します。 試験模擬題に関して、十分に試験を認証する基本知識を掌握しました後で模擬題はパソコンの方式で各知識の点を復習することを助けるだけことができます。
必ず100% E20-597 試験を受かることを保証し、Technology Foundations 証明書も得ます、印刷可能試験(Softwareフォーマット)試験 E20-597 調合の材料はすべての必要とする Technology Foundations を提供することができます。
以下はE20-597試験のデモです。
http://www.testpassport.jp/TechnologyFoundations/E20-597.asp
1. In NetWorker 7.4, what could be done to add a client to a group?
A. Drag the client onto the group resource
B. Drag the client onto the pool resource
C. Select the client in the group resource
D. Select the client in the pool resource
Answer: A
2. Which NetWorker edition is needed to configure a data zone with a NetWorker server with 16 LTO2
devices and 10 storage nodes with 32 devices each?
A. Business
B. Network
C. Power
D. Workgroup
Answer: C
3. Your customer is planning a NetWorker backup environment. They will have one NetWorker server and
two storage nodes, all sharing the four tape drives in one autochanger.
How many dynamic drive sharing licenses are needed?
A. 1
B. 3
C. 4
D. 12
Answer: C
4. A company wants to move to a backup-to-disk solution, and is considering Celerra. What is an
advantage of this solution?
A. Built-in tape acceleration algorithm
B. Extra hardware not required on the storage node
C. File system shares dedicated to individual storage nodes
D. Fragments file system to improve writes
Answer: B
EMC試験
EMCは、高度で柔軟性のある安全な情報インフラストラクチャの設計、構築、管理を支援します。情報インフラストラクチャは、さまざまな情報の用途に対応するための基盤となりつつあります。企業はこの基盤をベースに、情報ライフサイクル管理(ILM)戦略の実現、セキュリティによる重要資産の保護、競争優位性を確保するための自社コンテンツの活用、データ・センターの自動運用、電力/冷却コストの削減などを実行できます。
EMCは、革新を追求し、他社をリードしてきた長い歴史を誇っています。EMCでは、2006年、研究開発および戦略的買収に約40億ドルを投資することで、コアとなる機能を強化し、急速に拡大している新しい市場に参入しました。
こうした取り組みにより、EMCは、外部ストレージ・システム、すべてのストレージ・ソフトウェア、仮想化ソフトウェアの市場におけるマーケット・リーダーとして、IDCによる認定を受けるに至りました。Gartner Magic Quadrantによると、EMCは、エンタープライズ・コンテンツ管理、ミッドレンジ・エンタープライズ・ディスク・アレイ、ストレージ・リソース管理、セキュリティ/情報/イベント管理、Webアクセス管理、ストレージ・サービスの分野で業界をリードしています。EMCは、最も厳格な品質管理認定プログラムである国際標準化機構(ISO 9001)を取得し、製造工程に関してはMRP IIクラスAの認定を受けています。
EMC E20-510経験
EMCの教材は最もいいの最も権威的なテストの教材、試験教材はEMCを標準にとして。本は絶対見る事、幸いな心理があってはいけません。問題集を使ってもいいです、問題集を購入前に、デモを読んでいいと思います。例えば、E20-510問題集のDEMOはみんなと分かち合いします
http://pdf.testpassport.jp/E20-510.pdf
1. Which describes a benefit of using Replication Manager in a Symmetrix environment?
A. Automates concurrent replication between multiple storage arrays
B. Automates restore operations to an alternate array
C. Facilitates quick, frequent, and non-disruptive backups
D. Mounts multiple replicas to the same mount point
Answer: C
2. Which feature or features does EMC Replication Manager offer?
A. Automates creation and management of replicas on the array
B. Automates management and reporting of all replicas on the storage array
C. Provides tape restore capabilities to the array
D. Schedules tape backups based on user input
Answer: A
3. A customer requests that you create a user account for both monitoring the progress of scheduled jobs
as well as creating new application sets in Replication Manager.
What is the required account type that will satisfy only these operations?
A. Database Administrator
D. Power User
Answer: D
4. A customer requests that you create a user account to enable creation and restoration of Replication
Manager jobs. The customer does not want this account to control any functionality on the storage array.
Which account type will satisfy this request?
A. Database Administrator
B. Opertor
C. Power DBA
D. Power User
Answer: C
5. Which Replication Manager component contains a policy engine for determination of eligible storage?
A. Client
B. Console
C. Database
D. Server
Answer: D
6. A customer has performed the first three steps required when identifying the storage environment
Replication Manager will use for a specific job. The steps are:
1. Array discovery
2. Array configuration
3. Storage discovery
Which two remaining steps are required to complete the storage configuration process?
A. Create an RM job and activate the RM job.
B. Discover the RM Storage Pool and activate the Pool using the IRCCD RM process.
C. Identify an RM Device Group and create a Storage Pool within this device group.
D. Perform an Include Storage process and then create an RM Storage Pool.
Answer: D
7. When a TimeFinder/Mirror full restore is initiated for a BCV pair, which statement describes the
process?
A. The changed content of the BCV device is copied to the standard device.
B. The changed content of the standard device is copied to the BCV device.
C. The entire content of the BCV device is copied to the standard device.
D. The entire content of the standard device is copied to the BCV device.
Answer: C
EMC Legato Cert E20-361試験
EMCでは、仮想環境でも本番環境と同様な管理・運用が簡単に行える2つのVMwareに対応した管理ソリューションを用意している。
「EMCControlCenter」は、ESXサーバおよび配下の仮想マシンとストレージ内の物理領域の関係を管理できるソリューションだ。VMotionなど、仮想マシンの動的リソース再配置が発生しても構成情報を正しく追跡できることが大きな特徴だ。もうひとつのソリューションとして「Smarts」がある。こちらはESXサーバの検出と依存性マッピングおよび構成情報詳細を収集し、見える化してくれる。仮想環境下の各サーバのリレーションがマップとして可視化されるので、依存関係が一目で分かることが特徴だ。
EMCはVMware/EMC共同ソリューション・センターにおいて、相互運用テストを行い仮想環境と物理環境の相互運用性を確認していることから、安心してVMware環境で製品が利用できる。また、ストレージ、バックアップ、災害対策に加え、VMwareによるキャパシティプランニングにいたるまで、ワールドワイドで蓄積した多くの実績に基づいたコンサルティングを用意しているので、是非利用を検討してみていかがだろうか。
TestPassPort 実践試験の Legato Cert E20-361 は最も標準的な技術を正確的に書き入れ、認証した専門家と作者の出版した新製品だけを使います。
VUE/Prometric 試験番号: E20-361
試験の名称: Network Attached Storage (NAS) Implementation Exam
E20-361: Network Attached Storage (NAS) Implementation Exam専門認証の専門家達は業界経験を利用して精確に合理的な Legato Cert 認証を生産しています。ウェブサイトあるいは書籍から E20-361 試験問題を獲得することができるかもしれなくて、しかし論理は肝心な点です。私達の製品を利用して、一回だけで Legato Cert を受かることができます。その上またあなたの大切な時間を節約します。
1. A customer’s Celerra administrator wants to present several CIFS shares through one file server. The
shares are stored on many different physical machines.
What can be used with the Celerra to achieve this goal?
A. Celerra Data Migration Service
B. Distributed File System
C. Nested Mount File System
D. Virtual Data Mover
Answer: B
2. The file system fs01 must be mounted and exported on /mp1 as a CIFS share so only fs01 can be seen
by users. To do this, a system administrator will need to
mount fs01 to /mp1/fs01
export /mp1/fs01 as a CIFS share
What other step will the system administrator need to take to present this share so users only see fs01?
A. create the directory /mp1/fs01 from a Windows host
B. move .etc and lost+found to another directory.
C. mark .etc and lost+found as hidden.
D. unmount fs01 from /mp1
Answer: A
3. When you configure a CIFS Server on a Virtual Data Mover, which dynamic configuration information is
only saved to the Virtual Data Mover?
A. Home directory information
B. NFS file system information
C. Usermapper information
D. Virus checker information
Answer: A
4. What is stored in a Virtual Data Mover’s root file system?
A. CIFS security tokens
B. Home directory information
C. NAS root directory
D. Usermapper configuration
Answer: B
E20-500試験体得
私の E20-500試験を合格した体得、E20-500試験を受けたい友達に役に立てばいいと思います
試験題はそんなに難しくない、主に各知識点をよく理解してから楽に試験を通せます。
学習資料の選びは試験の成功にとってとても大切なんです、もし貴方が育成訓練に参加するなら資料は問題ではないと思います。もし独習するなら学習資料は肝心なことになる。もしあなたがEMC pressの資料が必要なら、広範にEMC試験を収集しなければなりません、それに、EMCの教材は最もいい最も権威のある資料である
EMCすべてのオプションは人にはっきりしなくて不確定だと感じさせます。だから準備の時きっと肝心な概念と教材の中で言及する細い点に対して十分な重視を与えるはずです
TestPassPort 実践試験の Implemenation E20-500 は最も標準的な技術を正確的に書き入れ、認証した専門家と作者の出版した新製品だけを使います。
VUE/Prometric 試験番号: E20-500
試験の名称: EMC Storage and Information Infrastructure Exam
印刷可能試験(Softwareフォーマット)試験 E20-500 調合の材料はすべての必要とする Implemenation を提供することができます。専門認証の専門家達は業界経験を利用して精確に合理的な Implemenation 認証を生産しています。
1.A customer backs up their Windows servers to tape. They would like to complement these backups with
disaster recovery protection in between backups. Current SLA requirements state that there can only
beminutes of data loss as well as the ability to recover within minutes or hours.
Which solution fits this requirement?
A. Avamar
B. Replication Manager
C. RepliStor
D. SAN Copy
Answer: C
2 .A customer has an existing production CX3-80 at their primary site and a CX3-20 at a remote site 2,000
km away. They have three dedicated DS3 and four T1 connections. They need to replicate their critical
databases from the primary site to the remote site. The total size of the databases is over 5 TB. They are
interested in a SAN-based method to move that much data. Their requirement is a RPO of seconds to
minutes.
They are currently negotiating a new WAN contract and are looking to reduce WAN bandwidth
requirements. Which EMC solution do you recommend?
A. RecoverPoint CRR
B. RecoverPoint/SE
C. RepliStor
D. SAN Copy
Answer: A
3 For a new customer, you are asked to help add disaster recovery for their CIFS environment. You
have sold two Celerra gateway servers, and would like to be able to isolate and replicate CIFS
environments between physical Data Movers for ease of Windows disaster recovery management.
What Celerra feature would simplify CIFS replication?
A. CDMS
B. NDMP
C. SRDF/S
D. VDMs
Answer: D
4 Your RecoverPoint presentation has interested your customer, but they do not want to manage host
agents. They want a proof of concept before committing to a purchase. They currently have Cisco MDS
9506 v2 directors with a mixture of 12-port and 24-port blades in their Windows and Linux environment.
Which hardware do they need to perform the test?
A. IP Services Blade
B. PortChannel
C. QoS Advanced Traffic Management
D. Storage Services Module (SSM)
Answer: C